Please review these frequently asked questions before continuing:
Q: How does this work?
A: Sign up for the Patreon, download the files you want, and then cancel your membership. You're welcome to stay...
2025-02-02 18:06:05 +0000 UTC View Post
These automatic collectors are compatible with either my 3D printed fry tray or the Fluval/Marina hang on tank breeding box. Silicone tubing is also required. 1/4" ID x 3/8" OD for the smaller collector or 3/8" ID 1/2" OD for the high flow uplift ...
2024-12-20 05:50:45 +0000 UTC View Post
Follow up from last night's video. Attached here are STLs for the 4.5" x 4.5" and 7" x 5.5" egg traps. I recommend a high infill % to make sure they sink. 30-40% has been enough for me. The majority of the print ends up being walls anyway.
...
2024-09-02 15:00:52 +0000 UTC View Post
I reworked the 5-gallon tank rails for the 7W trays and made a version to fit the 6.5W. The 6.5Wx10L seems to make the most of a 5-gallon's footprint so I think I'll be using this myself.
2024-06-09 02:32:21 +0000 UTC View Post
To prevent airline tubing from colliding with the tank glass on the 2.5-gallon tray size, I made a few variations of the uplift tube that, along with a general overhaul to the upper half, are oriented left, right, or straight forward when viewing ...
2024-06-09 02:30:16 +0000 UTC View Post
On request, a fry tray variant to fit the Aqueon 2.5-gallon tank. It doesn't need rails which is cool, but it's a small tray and a small tank water volume so be careful. I can't say I wouldn't do it, but this is kind of like raising fry on expert ...
2024-06-09 02:28:17 +0000 UTC View Post
Hi all,
New files are available. Specifics are available in the changelog but the most significant is the addition of a new line of trays that are 6.5 inches wide rather than 7. This was a frequent request and is aimed entirely at use as a s...
2024-03-11 00:05:22 +0000 UTC View Post
After a couple of months of testing, I think the "frustration free" Ziss hatchery stand is ready to venture out in the world.
I have included four height variants between 7 and 10 inches (original was 8in), along with a second set with a gre...
2023-10-17 02:04:15 +0000 UTC View Post
As I mentioned before, the uplift tube (specifically the opening to attach an airline fitting) will be subjected to the most wear and tear over time. Repeated compression of the material will eventually lead to a looser fit. Is that catastrophic? ...
2023-06-09 03:23:05 +0000 UTC View Post
For those wanting to print in PETG, it can certainly be done.
This was on my Ender 3 Pro with a direct drive extruder. Printed on a smooth borosilicate print bed using Overture PETG filament and Layerneer bed weld.
Ultimaker Cura slice...
2023-06-09 02:27:03 +0000 UTC View Post
Excellent job printing these parts! I'm very happy to see these turning out well on other printers and print settings.
If you would like to submit photos of your own prints, send them to makemorefish@gmail.com (let me know you're ok with the...
2023-05-26 19:26:45 +0000 UTC View Post
https://www.youtube.com/watch?v=16aFdagCLGk&t=1s
2023-05-20 16:37:17 +0000 UTC View Post
Attached .zip file includes all necessary STLs along with a copy of the EULA.
Key points if you didn't watch the video:
You must use an airline valve to control the air pressure supplied t...
2023-05-19 17:24:19 +0000 UTC View Post