Slightly Overloaded...
Added 2024-03-29 00:44:50 +0000 UTCVideo coming soon!
Comments
Haha! Now that’s fun!
Jeffrey Burdess
2024-03-30 21:06:47 +0000 UTCAs to the problem of too much work, the local old time mechanical clock box fix-it guy, has door sign saying: NOT Accepting Additional Mechanical Repair Requests.
Clark Douglas
2024-03-30 17:20:06 +0000 UTCI mean, you could have Mrs. Wes drive while you direct her. Wouldn't that count?
Tony Publiski
2024-03-30 03:28:02 +0000 UTCHave you got 3 phase now then or going to run a phase converter?
Darran
2024-03-30 02:49:18 +0000 UTCThe first rule of trucking!
Watch Wes Work
2024-03-29 20:01:31 +0000 UTCAs long as you did the D.O.T procedure of snapping the ratchet straps and saying: this isn't going anywhere, you're fine
John Schwedes
2024-03-29 18:42:24 +0000 UTCADHD is in control.
Watch Wes Work
2024-03-29 18:41:34 +0000 UTCI understood we were going to finish the unfinished projects first...lol
boubaros
2024-03-29 18:33:02 +0000 UTCThat's the funniest looking RV I've ever seen.
Bill
2024-03-29 15:25:59 +0000 UTCYes, definitely a T shirt!
Joe Freet
2024-03-29 14:55:04 +0000 UTCSome might call it "evidence".
Watch Wes Work
2024-03-29 14:21:50 +0000 UTCLMAO!
Watch Wes Work
2024-03-29 14:21:29 +0000 UTCIt's about time we got some good out of it.
Watch Wes Work
2024-03-29 14:21:05 +0000 UTCIt involves staying far away and poking it with a stick.
Watch Wes Work
2024-03-29 14:20:43 +0000 UTCYeah it could have ended badly.
Watch Wes Work
2024-03-29 14:20:21 +0000 UTC'tis
Watch Wes Work
2024-03-29 14:19:36 +0000 UTCLoad testing.
Watch Wes Work
2024-03-29 14:19:20 +0000 UTCIt looks that way!
Watch Wes Work
2024-03-29 14:19:09 +0000 UTCI need a remote control forklift.
Watch Wes Work
2024-03-29 14:18:51 +0000 UTCMaybe
Watch Wes Work
2024-03-29 14:18:04 +0000 UTCHmm.
Watch Wes Work
2024-03-29 14:17:56 +0000 UTCYes and yes.
Watch Wes Work
2024-03-29 14:17:41 +0000 UTCI believe this is what is referred to as “the before picture”
Marshall
2024-03-29 13:04:40 +0000 UTCNothing to see here OSHA. Just move along.
Jeff Chandler
2024-03-29 13:00:13 +0000 UTCThis should be a t--shirt, but enhance the shadow silhouette at bottom of frame = Money!
Bill G
2024-03-29 11:16:38 +0000 UTCIt's ok everyone, the ratchet straps are tied together with a double knot
David Jorgenson
2024-03-29 09:32:46 +0000 UTCCNC - Completely Non Compliant... This looks fun!
Alan Wood
2024-03-29 09:23:53 +0000 UTCNothing like using a Case backhoe which appears to be haemorrhaging oil as a land anchor to add a little extra gravity to help your forklift balance! 😬
David Yates
2024-03-29 07:26:04 +0000 UTCTrue the skidsteer does look a bit off balance
Anthony deFreitas
2024-03-29 07:06:00 +0000 UTCIf you could please draw up one of your green graph-paper diagrams explaining the master plan here, that would be great….. 🔧🚧
Marshall
2024-03-29 05:10:49 +0000 UTCYou're right it does look it might be a CNC. This will be interesting...
Lance C
2024-03-29 04:29:47 +0000 UTCAll kidding aside when you're trying to defy gravity be careful it might bite you in the ass
Terry Kasprzyk
2024-03-29 03:09:46 +0000 UTCWhatever it is—it’ll be interesting and entertaining.
Virtue Streams
2024-03-29 03:08:54 +0000 UTCLooks like a CNC mill of some sort. I hope it needs repair. I love the CNC stuff.
John Lundh
2024-03-29 02:43:26 +0000 UTCAnd this year's Andrew Camarata lifetime achievement award goes to....
Adam Salerno
2024-03-29 02:38:02 +0000 UTCDa fuq?!
Frank Nimeth Jr.
2024-03-29 02:29:17 +0000 UTCDo we need to have an intervention about sketchiness?
Joe Freet
2024-03-29 02:26:37 +0000 UTCThat's a *lot* of stuff..
Keith Mezzina
2024-03-29 02:15:10 +0000 UTC"Waitaminute, hold my beer, I got this,"
John Lottes
2024-03-29 01:59:29 +0000 UTCCan we dial down the sketchiness just a touch? LOL
Martin lewis
2024-03-29 01:50:44 +0000 UTCThat’s….awesome!?
Jay and Kate
2024-03-29 01:42:31 +0000 UTCOh, yummy! I see Pizza in our future
Thorman
2024-03-29 01:36:07 +0000 UTCTell me that's what it looks like, a cnc machining centre. Wes is back in the game. I'm with Jon I think that really needed a couple of zip ties just to be sure.
CodeAdze
2024-03-29 01:32:55 +0000 UTCcouple of zip ties and you will be right in there
Jon Koferl
2024-03-29 01:19:42 +0000 UTCI did need to test it.
Watch Wes Work
2024-03-29 01:17:39 +0000 UTCGood thing you rebult the lift cylinder lol
Terry Kasprzyk
2024-03-29 01:14:03 +0000 UTCLooks normal to me.
centauri61032
2024-03-29 01:03:29 +0000 UTCLOL! I only heard this song in my head as I looked at that picture :) https://youtu.be/aW1AJitVY5k?t=10
Bruce Timberlake
2024-03-29 01:02:45 +0000 UTCI think there's a lot of ways this could be better. Like a whole lot...
Watch Wes Work
2024-03-29 01:02:28 +0000 UTCI briefly ran a VM1 many moons ago didn't seem like a bad machine. I run DMG 5axis with Siemens 840D control these days.
Darran
2024-03-29 01:01:49 +0000 UTCMight be better with a good come along not a tie-down strap
Terry Kasprzyk
2024-03-29 00:57:48 +0000 UTCShe said it was OK.
Watch Wes Work
2024-03-29 00:56:50 +0000 UTCHurco
Watch Wes Work
2024-03-29 00:56:23 +0000 UTCYeah, this was certainly not on the chart!
Watch Wes Work
2024-03-29 00:56:04 +0000 UTCWhite Knuckle Forklift Service, Inc.
Steve Covello
2024-03-29 00:55:51 +0000 UTCCome on now, it's strapped to the outrigger...
Watch Wes Work
2024-03-29 00:55:30 +0000 UTCThis is hard for a retired crane operator to look at.
Terry Kasprzyk
2024-03-29 00:53:51 +0000 UTCStrap to the bucket seals it 🙌
James Riordan
2024-03-29 00:53:39 +0000 UTCSketchy enough that I needed Watch Wife Work to supervise.
Watch Wes Work
2024-03-29 00:53:18 +0000 UTCThat might be sketchy.
Eric Corse
2024-03-29 00:50:43 +0000 UTCLines, and tighteners, and beers, oh, my!
Stephen Meeks
2024-03-29 00:50:04 +0000 UTCLooks fine from my house.
Adam McKnight
2024-03-29 00:49:33 +0000 UTCLol always problems, im sure you will get to the bottom of them. What make is it?
Darran
2024-03-29 00:48:40 +0000 UTCYou're close...
Watch Wes Work
2024-03-29 00:48:04 +0000 UTCHydraulics were good. The forklift just didn't have enough forklift.
Watch Wes Work
2024-03-29 00:47:23 +0000 UTCSure seems ready to load on a truck to me.
Craig D Renwick
2024-03-29 00:47:01 +0000 UTCNope. This is a new one with fun new problems.
Watch Wes Work
2024-03-29 00:46:58 +0000 UTCNew cnc content, nice. Is that the one you had at your old shop?
Darran
2024-03-29 00:46:27 +0000 UTCThis is how we test out the hydraulics, eh?
ɥsoſ uʍop ǝpᴉsd∩ (ʘ︹ʘ)
2024-03-29 00:46:08 +0000 UTCUmmmmm 😂
Jeff Duke Jr.
2024-03-29 00:45:53 +0000 UTC
