Part 2 of the Office Build
Added 2024-05-05 12:20:57 +0000 UTCIt's coming along!
Comments
I won't judge your trim if you don't judge my parts cannon approach. (Turns out the sensors were fine, still haven't found the issue)
Brendan Hood
2024-05-14 23:31:41 +0000 UTCI'm sure youv'e been down that rabbit hole but if you ever have some spare time check out "Liberty Engine" on YouTube along with the free energy flywheel, in a post from Pakistan. If there is no such thing as perpetual motion, I'd like to know how these examples seem to work. https://www.youtube.com/watch?v=PB4w_fH4hgg
David G King
2024-05-13 12:57:46 +0000 UTCIt's like having a super power.
Watch Wes Work
2024-05-13 01:43:52 +0000 UTCOh boy. Wait until you see the trim work...
Watch Wes Work
2024-05-13 01:43:28 +0000 UTCI might. I have to run the numbers on what is cheaper/faster.
Watch Wes Work
2024-05-13 01:42:45 +0000 UTCIt seems like it did, but the stabilization is not working correctly.
Watch Wes Work
2024-05-13 01:42:11 +0000 UTCHe is!
Watch Wes Work
2024-05-13 01:41:51 +0000 UTCInteresting. I didn't know it was that old.
Watch Wes Work
2024-05-13 01:41:38 +0000 UTCYes!
Watch Wes Work
2024-05-13 01:41:07 +0000 UTCI was happy to hire out the mud and tape.
Watch Wes Work
2024-05-13 01:41:01 +0000 UTCThere's still plenty of BS behind the scenes...
Watch Wes Work
2024-05-13 01:40:32 +0000 UTCNot familiar with that one.
Watch Wes Work
2024-05-13 01:39:48 +0000 UTCWes, Thanks for another great show!! Best thing - no one got hurt; always a plus in construction projects. I really liked your insulation installation methodology. I also like how you just cut through the BS and get it done. Can't wait to see the finish!
Dr. Internet
2024-05-10 20:00:35 +0000 UTCHey Wes, on a different subject. What do you think about the "Liberty Engine"? That would be a project right up your alley.
David G King
2024-05-07 22:21:07 +0000 UTCDunno, I've only been in the construction biz for 40 years. Generally, a person has to go with what they feel most comfortable with, and not "what everyone else does." You are likely going to have more electric heat than cooling. Which suggests a drying effect to the inside. Which would suggest impermeable to outside. And to use an oil or lacquer based (permeable) paint for the interior. Note, "suggests." Not even IRC requires so very much.
CapnMac82
2024-05-06 22:45:12 +0000 UTCIt's looking good Wes!
Greg G.
2024-05-06 11:42:40 +0000 UTCLooks great Wes and that palm nailer is sweet! I think I need one for no good reason... π
Christopher
2024-05-06 09:04:30 +0000 UTCIt's been a fun journey watching the progress and the process. I'm a 7th generation carpenter (although I'm a finish guy and cabinetmaker) who dabbles (with moderate success) in mechanical work. It's like we swapped roles. I've been fighting with a cam/crank correlation code on a Jetta, you've been fighting with stairs. Both could end badly if done wrong.... I'll freely admit I have no idea about the nuances of building code in the US Midwest, if you do run into one of those "So now do I finish this" situations, feel free to reach out. You're way outside of my normal service area, so I don't mind giving some free advice. Now, if you were in my area....I might cut you a deal on my shop rate.
Brendan Hood
2024-05-06 01:58:06 +0000 UTCI couldn't agree more, drywall guys are worth their weight in drywall mud.
South Street Barbecue
2024-05-05 23:22:34 +0000 UTCWes, since you have the plasma table you can do your railing from metal. Cut the plates that attach to the bottom on the langmuir and use 2x2 sq tube. You could also use it for the post and save a couple inches. Would be stronger, lighter, etc, etc. Prob faster too.
Wm
2024-05-05 22:58:43 +0000 UTCDamn good job, especially for a mechanic, hope the camera survives.
Robert
2024-05-05 21:19:44 +0000 UTCWes you are a goddamn machine. You are the only channel I support on Patreon. Your work, humor, dedication, and skills are awesome. Thank you. P.S. The guy who gave you the tools is a real good man. Thank you sir.
Dan King
2024-05-05 21:10:22 +0000 UTCLooking great! Plywood was around before the 50's. My home was built from materials salvaged from the 'Liberty Ship' shipyards in South Portland Maine. The shipyard was active from 1941 to 1945. The walls of my house are sheathed in a marine-grade plywood that was used in the 'mold lofts'. 3/4" and incredibly strong.
Darren B McLellan
2024-05-05 20:52:01 +0000 UTCMe too Wes. Me too.
Curtis Roberts
2024-05-05 20:16:13 +0000 UTCLooks like a top notch job to me !! Congrats.
dozerman53111
2024-05-05 19:32:17 +0000 UTCGreat work on the stairs and insulation. A timely delivery of tools too.
Stephen Meeks
2024-05-05 19:26:30 +0000 UTCI would have hired out for the sheetrock to. Don't like sheetrock!! Office looks great!! Top notch job!!
Aaron Windsor
2024-05-05 18:48:53 +0000 UTCNice work Wes looking forward for part 3
Brandon Carpenter
2024-05-05 18:48:12 +0000 UTCI knew you'd get a kick out of it. It makes me feel like Iron Man driving nails in with my hand. I'm really glad it was useful.
Marc Lippmann
2024-05-05 18:45:21 +0000 UTCWes, ya heard Necessity is the Mother of Invention ?-- Well, ya learnin' - Desperation is the Deddy ! Did all that in my own Duplex 1800 sq ft home.
Maurice Johnson
2024-05-05 18:38:49 +0000 UTCSo what are you supposed to do if you are painting inside and outside? Do you need vents? The more I tried to research the more confused I got.
Watch Wes Work
2024-05-05 18:38:11 +0000 UTCYeah I should have notched the post. I will do so on the others.
Watch Wes Work
2024-05-05 18:37:04 +0000 UTCThanks! I struggle with long projects like this. The videos actually help me stay motivated.
Watch Wes Work
2024-05-05 18:35:59 +0000 UTCWhich is most days!
Watch Wes Work
2024-05-05 18:35:11 +0000 UTCMy brother in law in an HVAC expert, so I will rope him into helping!
Watch Wes Work
2024-05-05 18:34:39 +0000 UTCIt would be great, but would require a dedicated operator. I need some kind of silent, self guided, drone.
Watch Wes Work
2024-05-05 18:33:01 +0000 UTCThere will be no appeasing the VB nutters. Your region is "in between" per the various Building Science definitions of Hot/Cold climate. In majority heating, the VB goes to the inside; in majority cooling, it goes to the outside. The biggest thing is that you do not want to trap moisture between two impermeable planes. And most latex paint is 0 perm.
CapnMac82
2024-05-05 18:04:43 +0000 UTCAllegedly, Russel Morash Producer and lead cameraman for This Old House preferred a StediCam over anything on a tripod or the like, as construction sites are inherently inimical to camera equipment. Whether or not his 40-plus year's experience is worth noting is a personal decision.
CapnMac82
2024-05-05 18:00:54 +0000 UTCThere will always be Nancy the Nagger for anything construction. They are often loudest when they have the least experience. Apply that grain of salt as required. Those stairs are as well built as the ones on my US$53 million project in Boston I was visiting just on Wednesday.
CapnMac82
2024-05-05 17:57:07 +0000 UTCGreat progress and you're showing off if you managed to get all your stringers to line up on your first go! If you want a little extra load bearing insurance, you can notch the posts on your landings so the load goes through the post instead of the nails. Place is going to look really great with those big bay windows when you're done!
Andrew Roberts
2024-05-05 17:50:20 +0000 UTCHi Wes. Looking beyond the obvious joke regarding the joy of watching other people do good work, there really is a high level of satisfaction watching the office project come together. It looks awesome. People I believe can relate to a lot of the work that you are doing and learning about things they do not. Thanks again for these well put together diy documentaries. π¨π¦
Marshall
2024-05-05 17:04:00 +0000 UTCNice work. It looks great. Now you have a backup career just in case you ever decide you hate automotive!
Curtis Roberts
2024-05-05 16:25:50 +0000 UTCNice work, I think as long as your concrete does not sweat when you open the garage doors in the summer you probably have all the vapor barrier you need. Mini splits are great, most of them are DIY for sure, your automotive gauges and vacuum pump will be all the tools you need to install one, even easier with the mr cool style precharged lineset, but you then have to do something with the excess lines, easier to get a neater installation cutting the tubing to length and vacuuming it.
Greg
2024-05-05 16:12:22 +0000 UTCLooking good π
Anthony deFreitas
2024-05-05 16:11:47 +0000 UTCIn 2009 I built a standalone garage on my property and the hoops I had to jump through to get it done was just unreal and don't bring up the right of way that caused me to have to rework the foundation for the overhead electrical power wires. So, I can feel your pain even today.
Jon Koferl
2024-05-05 15:58:44 +0000 UTCA few years back, I replaced the main electrical panel of my parents cottage up north, and when I was done I had one circuit for some ceiling lights that no longer worked. Took me awhile to figure out what the hell I'd done wrong. Finally, I found that I hadn't done anything wrong, but that whoever did the wiring in the first place apparently ran the wire a few feet too short. So they "fixed it" by running a short run between the panel and the wire that was too short, and then just touched them together, taped it with some electrical tape, and called it good. It worked for a few decades I'd guess, but it was pretty scary. No wire nuts, nothing but two wires just touching and some old tape. Replaced that entire run in a hurry and was thankful it hadn't burned the place down over all that time.
Tony Publiski
2024-05-05 15:32:26 +0000 UTCπ
James Riordan
2024-05-05 15:29:43 +0000 UTCLMAO! Dad joke of the week!
Watch Wes Work
2024-05-05 15:25:11 +0000 UTCThere might be a CAD program that does that, one made for architects. Maybe there's even a module for Fusion that can do it. If not, it would be a good idea.
Watch Wes Work
2024-05-05 15:24:58 +0000 UTCIt's the coolest little tool! I used it all over.
Watch Wes Work
2024-05-05 15:23:36 +0000 UTCYou absolutely nailed it!!!
Rex Stetson
2024-05-05 15:14:44 +0000 UTCInteresting. I didn't know that. I remember reading about the Sears catalog houses and why they were so popular. In an age with no power tools, pre-cut lumber was a huge time savings.
Watch Wes Work
2024-05-05 15:14:26 +0000 UTCWouldn't be nice if the building codes could be automatically load up to you CAD so you would have to wade through.
Jon Koferl
2024-05-05 15:06:46 +0000 UTCThere's a lot of cutting involved, and that's always slow for me.
Watch Wes Work
2024-05-05 15:01:36 +0000 UTCThe pure joy on your face when the little air hammer went off was priceless. Also the absolute generosity of the viewer who sent you all the air tools was amazing! Congrats on the new office and I'm sure it'll help tons in the future. A clean, dry quiet place to run the businessis wonderful. All the best!
Peter Nowikow
2024-05-05 15:01:32 +0000 UTCOh, thanks for the screwdrivers. Man they are nice! Those Japanese don't mess around.
Watch Wes Work
2024-05-05 15:00:28 +0000 UTCIs it for fire resistance? I was wearing a mask, but still did a lot of sneezing.
Watch Wes Work
2024-05-05 14:59:54 +0000 UTCI think it's the way to go.
Watch Wes Work
2024-05-05 14:59:25 +0000 UTCLooking good. Did the same thing, except it was me hitting the floor doing a new sub floor on my shop mezzanine. I fared better than your camera did, so back at it. I used mostly grabber screws to not offend the hammer godsβ¦
Rod Richeson
2024-05-05 14:57:41 +0000 UTCLooking good Wes! I had the same reaction when I first used a palm nailer...it's the neatest thing ever, isn't it? My house was built in 1923 and I have the same staircase you do, other than the newel post being a little more ornate. They didn't have power tools, but they really didn't need them...staircase components were bought out of catalogs ready to install so they just needed to assemble them and scribe/tweak as-needed
Chris Freemesser
2024-05-05 14:41:28 +0000 UTCGreat job Wes! You did a better job than most of the contractors I have seen. I bought one of those palm nailers when doing a bunch of joist hangers in tight quarters and it saved me a bunch of time. The only reason it took so long is you didnβt slap dash it together.
Tom Hollowell
2024-05-05 14:25:50 +0000 UTCLooking good you will be glad you made those stairs wider.When I finished my office above my garage I added blown cellulose above the fiberglass bats, I can still taste the boric acid.
Eric Corse
2024-05-05 14:21:49 +0000 UTCLooking good Wes! And yes, hiring the sheetrock finishing was a good plan! BTW I second the mini split suggestion. Put one in my shop last year and love it!
Eddie Williamson
2024-05-05 14:13:50 +0000 UTCYeah I think so. They look pretty sweet.
Watch Wes Work
2024-05-05 14:03:33 +0000 UTCYeah, I could do it, but I think it was money well spent.
Watch Wes Work
2024-05-05 14:03:05 +0000 UTCComing soon!
Watch Wes Work
2024-05-05 14:02:39 +0000 UTCI could have done it, but it would take me a week to do what they did in 4 hours, and it would not have been as good.
Watch Wes Work
2024-05-05 14:02:30 +0000 UTCThe mask is a must!
Watch Wes Work
2024-05-05 14:01:49 +0000 UTCThat's all that matters!
Watch Wes Work
2024-05-05 14:01:35 +0000 UTCYes. I was planning to add it.
Watch Wes Work
2024-05-05 14:01:17 +0000 UTCππ»ππ»ππ»ππ»Family stamp of approval β
Virtue Streams
2024-05-05 13:53:58 +0000 UTCNice job on the stairs...as you said, they can be complicated. Baseboard on the office walls? Please consider it, if it's not already planned.
Bruce Rose
2024-05-05 13:40:58 +0000 UTCLooking awesome Wes! It is inspiring to see what a self described non-carpenter can accomplish, gives me hope for my future projects. The previous "electrical work" was cringe worthy, your new setup with the subpanel, etc looks so much better. If/when you add AC would you go with a mini split / heat pump setup?
Matt Londergan
2024-05-05 13:34:32 +0000 UTCI've acquired a lot of skills over a lifetime of being poor/cheap, and drywall is one of them. I've also acquired the knowledge of which jobs I can do, but choose to hire someone else to do instead. Drywall work is one of the latter. Everything looks great so far Wes, I'm really glad you're doing it!
South Street Barbecue
2024-05-05 13:12:26 +0000 UTCMore great work! Can't wait for part 3.
Peter Church
2024-05-05 13:03:56 +0000 UTCWes, it looks great! I think you were smart to hire out the drywall finishing, that is one skill I have never been very good at. You, however, are a master handyman!
Jack Nevitt
2024-05-05 13:02:00 +0000 UTCI can smell the drywall dust.
K H
2024-05-05 12:38:07 +0000 UTC
