Thank you all for your abundance of patience this month :) It's going to be a busy week coming up and a few new models, sneak peaks etc. will be posted, so stay tuned!
For you folks who thought you had my release formula down to a science.....
As many of you know, my older files were not designed for easy painting if you own a Prusa or Bambu machine that allows for AMS and colored prints.
I have been slowly working on getting these completed and making sure they prin...
Thank you all for coming back this month to snag the second of the Viking Pair.
I have also added a short broadsword and hope to add more as time allows down the line.
She was fun to color, but I did many test prints in various mul...
She is on the printer now and looking fantastic. In case you gnome fans want to get a jump on the PLA colors, the green is duel color but turns out shiny Emerald!
- ERYONE Yellow/Green Silk: 2023-06-23 18:54:14 +0000 UTC
View Post
Hi,
Just a small change.
* I upped the Resolution on the owl head. This fix is only noticeable if you print it really big (that's how I noticed it).
* I also updated the .3mfs with the new head, and separated the eyebrows as a di...
2023-06-20 16:14:16 +0000 UTC View Post
Second update has the most recent files 6/20/2023
And Final files are also in the June Files post.
UPDATE: I noticed on some slicers the left wing could cause a crash. I have fixed and updated the bug.
.................................
Y'all it has been a week and I am pushing through to get out the Early Release this weekend (all my fingers and toes crossed.)
I usually post a sneak peek, but I have some new mechanisms for this one and I want to make sure everything is as...
Just wanted to share a working screen shot of the June exclusive Flexi Wolf.
Wrapping it up now, and dropping this Friday June 2nd.
Hope you like it
-Dan
Really wanted to get this Bonus out before the US holiday weekend.
*** Princess Viking Gnome is coming next month.
I am providing the colored file as well as the stl. But I just started the print and will upload phot...
2023-05-26 19:58:41 +0000 UTC View Post
As many of you know, the Exclusive Skeleton Knight from April was also voted to be released as a Charity Print for our non-profit, Flexis For A Cause!
We have been working on getting approval from the receiving group, Limbitless Solutions,...
I have been working on printability and made a few small tweaks, after wrapping up many test prints and troubleshooting with a couple folks. There was a bit of a steep overhang on the neck that appeared on some prints. These files should do the tr...
2023-05-23 17:47:31 +0000 UTC View Post
Ok folks...#teamteeth or #teamnoteeth??? You now have options for 4 different models.
I got several requests for these. I went ahead and added the ALICORN, plus all models without the delightful toothy grin. Had to keep it smiling thou...
2023-05-21 18:45:52 +0000 UTC View Post
I have had hundreds of requests for these models, and finally able to provide all three for you awesome folks! Flexi and standing, no supports of course. And for the Pegasus, I decided to go with a very snug fit, but not attached for more customiz...
2023-05-18 19:58:37 +0000 UTC View Post
To the 3 Mamas in my life and all the Mothers in the group...
Hoping you are being celebrated today.!!!
-Dan
I may have made this teaser a little too easy... But I promise the end result still has a few surprises. Better get those frogs printed, because this one is going to be magical scaled up, has some fun color/design variations, and I think you...
2023-05-12 21:41:17 +0000 UTC View Post
It is that time of the month again.
For those of you just joining Patreon... this is a limited release that will be available during the mo...
Big Thank you to all who voted on this special character! Had lots of questions about making accessories and removable pieces...but for printability and to avoid little tiny parts that would be fragile, I opted for a true Print-in...
2023-05-02 23:16:01 +0000 UTC View Post
Hello! PLEASE READ before commenting below. I make a post on the first day of each month with all available downloads. And I ADD TO THIS POST as the month progresses.
Full Model List Found Here: 2023-05-01 09:01:01 +0000 UTC
View Post
Time for a new code this month...Can be used at checkout for any of my older models released before you joined:
VivaFiesta23FF
Only works for Flexi Factory models in the shopping cart.
Here is the link to MMF ...
If you're a frog lover...this one is going to be fun to add to your collection.
I gave this character some extra attitude, and some strategically placed gear that will help with printability (and clearly aid in a successful mission.)
Happy Frayay...as my nine year old likes to say! Wanted to get these out for you folks that might be doing shows this weekend. The solid colors print pretty quick.
I added a stand and a bunch of different accessories. They work for b...
UPDATE: First off...I do not recommend going 50%, 60% is better. Printed on the Bambu in 3 colors, .16 layer height, took almost 12 hours.
- Joints are good
- One of the pinwheels broke
- There is definitely a loss of det...
Two Flexi Teddy Bears and a "mostly" print-in place accessory pinwheel.
Hoping to get these out tomorrow. Still making final tweaks and tes...
My kids are too grown for hunting eggs, but never too old for peeps.
I have my printers running, and now it's time to eat. Happy Sunday y'all! -Dan
We still have quite a bit of time for the vote, but I wanted to show y'all the inspiration for the model.
When I worked at IGT, we had a little lunch battle going as motivation to keep our drawing skills sharp. We had to submit a drawing e...
It is that time of the month again. This one is going to be tough ;)
For those of you just joining Patreon... this is a limited release that will be ava...
I added a new file for folks that want to make it really big!
You can print the tray and tail separately and glue together (I suggest super glue for PLA).
Thanks for the suggestion :) Dan
2023-03-28 13:14:52 +0000 UTC View Post
Just thought it was too cute to pass up. Lots of options here for printing and different configurations to sell. I added the color file shown above. The tray has a tail and collar, or just the collar :)
Here are the filament links:
-...
2023-03-21 17:06:27 +0000 UTC View Post
For those of you who want to print a massive shark!
The big one in the picture is 220% (printed on the Bambu) the little ones 50% and 60%
I don't suggest using the curved if you're printing small because the tolerances are a little tig...
2023-03-19 17:39:24 +0000 UTC View Post
Small update.
After printing a little shark, I noticed that the fins were a little stuck and I had to work them free.
This update fixes that. I also updated the multicolor files.
Thanks again
-Dan